Needed a tool drawer thingy but nothing I saw online was the right size. Ended up buying some serving trays from IKEA and printing this rack for them. Ended up going with PLA, seems strong enough. 4 perimeters with a 0.6mm nozzle.
You must log in or register to comment.
- ramenshaman@lemmy.worldEnglish40 minutes
Bambu H2D. I bought it before the most recent shitty thing they did.
- 2 hours
One single print or assembled? What printer did you use? I’m fascinated. I’ve wanted to make big storage for my bigger hobbies but I have a small printer.
- ramenshaman@lemmy.worldEnglish39 minutes
Bambu H2D. I bought it before the most recent shitty thing they did.
- papalonian@lemmy.worldEnglish1 hour
Use your small printer to build a slightly larger printer, and then use that printer to build a slightly even larger printer. Then print this
4 hoursThis is definitely one of those, “I dont have access to a tablesaw” prints. I feel you, I’ve got no room for one either.
- ExcessShiv@lemmy.dbzer0.comEnglish4 hours
You can build things without a tablesaw…a simple jigsaw and a spirit level as a guide gets you good results for straight cuts, just a little slower.
With some practice a regular saw will even get you good results for simple things like this.
- 4 hours
Tbf, 2.6kilos of bulk china PLA is probably cheaper than the sheet of plywood and glue+screws it would have taken to build that.
- GorGor@startrek.websiteEnglish4 hours
A table saw is not really needed for this sort of thing. A router with straight edge guides would work for dados for the shelves. Technically you could CTL with the router too, if you didn’t have a circular saw.
- ramenshaman@lemmy.worldEnglish3 hours
Well I have a 48" x 32" CNC but it lives about 20 minutes away from me.
- ExcessShiv@lemmy.dbzer0.comEnglish4 hours
Impressively large print, but I would’ve probably just built this in plywood or MDF.
- ExcessShiv@lemmy.dbzer0.comEnglish4 hours
Hah I’m not even sure, even cheap materials like plywood have gotten expensive
- pageflight@piefed.socialEnglish4 hours
Cheap materials like pieces of the IKEA furniture my neighbors are throwing away?
